 |
MODEL: P535U
This is used for the films from which processing
temperature turns into no less than 500 degrees.
Pitch size is 3inches（76.2mm).
|
MODEL: RP300A1
This is the powerful pin chain which can be used
in the high temperature of 500 degrees by the
product made from all stainless steel.
Pitch size is 4inches(101.6mm).
|
 |
 |
MODEL: R243
This is clip which made from all stainless steel
for film tenter machine.
It is the optimal highly efficient clip for widening
powerfully under high temperature.
Clip pitch is 3inches(76.2mm).
|
MODEL: R241B1
Blade of this clip has the edge of a multi-formula
which can respond to the thickness of a processing film.
High-speed 250-300m run/min. is possible.
The spring for pushing the blade is an auto change formula.
Clip pitch is 4inches(101.6mm).
|
 |
 |
MODEL: R229A1
Like R241B1 type, it is powerful and has high-speed ability.
The edge of a blade is a two-sheet edge.
Clip pitch is 3.5inches(88.9mm).
|
MODEL: R219A5
This is standard model of 4inch film clip.
Using 2inch strong brock link and using silicon
rubber sheet on its plate for press down a film softly.
|
 |
 |
MODEL: R259A1
Attaching a stopper beside an arm of main body for
prevent a film entering the back.
The angle of a corn of blade is designed its height
may be made low with a retreated type and thermal
efficiency may be improved.
Clip pitch is 4inches(101.6mm).
|
MODEL: NSA3B
This is 2inch pitch film clip.
This is suitable for trial machines, it is used also
practical use production machine.
It has the edge of a multi-formula which can
respond to the thickness of a processing film.
|
 |
 |
MODEL: R176
This clip is used for Bruckner tenter machine.
For prevent getting out the film from clip two blades
are used in each clip.
Clip pitch is 120mm.
|
MODEL: R177
This clip is also used for Bruckner Tenter machine.
It is designed powerful style which is used two blades.
Clip pitch is 120mm.
|
 |
 |
MODEL: S11F
This is the most simple film clip and it realize
low cost.
Clip pitch is 4inches(101.6mm).
|
MODEL: PD15R
Since a tension is received at back side bearing,
this clip operated smoothly.
It has the edge of a multi-formula which can respond
to the thickness of a processing film.
The angle of a corn of blade is designed its height
may be made low.
This clip is mainly used for polyester film.
Clip pitch is 4inches(101.6mm).
|
 |
 |
MODEL: MW30C
This clip is used for Mercial and Williams U.S. tenter machine.
The spring for blade is a change formula.
Clip pitch is 3.5inchies(88.9mm).
|
MODEL: NSA3A6
This is 2inch pitch film clip.
This is suitable for trial machines, it is used also
practical use production machine.
|
 |
Film clips
